commit

configuration.nix

@@ -0,0 +1,99 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "nixos-ytd"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/Boise";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.kyler = {
+    isNormalUser = true;
+    description = "Kyler Olsen";
+    extraGroups = [ "networkmanager" "wheel" ];
+    packages = with pkgs; [];
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    wget
+    micro
+    git
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "24.11"; # Did you read the comment?
+
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+}

flake.lock

@@ -0,0 +1,48 @@
+{
+  "nodes": {
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1746171682,
+        "narHash": "sha256-EyXUNSa+H+YvGVuQJP1nZskXAowxKYp79RNUsNdQTj4=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "50eee705bbdbac942074a8c120e8194185633675",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-24.11",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1746557022,
+        "narHash": "sha256-QkNoyEf6TbaTW5UZYX0OkwIJ/ZMeKSSoOMnSDPQuol0=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "1d3aeb5a193b9ff13f63f4d9cc169fb88129f860",
+        "type": "github"
+      },
+      "original": {
+        "id": "nixpkgs",
+        "ref": "nixos-24.11",
+        "type": "indirect"
+      }
+    },
+    "root": {
+      "inputs": {
+        "home-manager": "home-manager",
+        "nixpkgs": "nixpkgs"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

flake.nix

@@ -0,0 +1,33 @@
+{
+
+  description = "Kyler Olsen's flake";
+
+  inputs = {
+    nixpkgs.url = "nixpkgs/nixos-24.11";
+    home-manager.url = "github:nix-community/home-manager/release-24.11";
+    home-manager.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+  outputs = { self, nixpkgs, home-manager, ... } : 
+  let
+    lib = nixpkgs.lib;
+    system = "x86_64-linux";
+    pkgs = nixpkgs.legacyPackages.${system};
+  in{
+  	nixosConfigurations = {
+  	  nixos-ytd = lib.nixosSystem {
+  	  	inherit system;
+  	  	modules = [ ./configuration.nix ];
+  	  };
+  	};
+
+  	homeConfigurations = {
+  	  kyler = home-manager.lib.homeManagerConfiguration {
+  	  	inherit pkgs;
+  	  	modules = [ ./home.nix ];
+  	  };
+  	};
+  	
+  };
+
+}

hardware-configuration.nix

@@ -0,0 +1,36 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports = [ ];
+
+  boot.initrd.availableKernelModules = [ "ata_piix" "ohci_pci" "ehci_pci" "ahci" "sd_mod" "sr_mod" ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/ec8ceed7-4d76-46ce-b270-a9c505a1b336";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/E842-22E1";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp0s3.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  virtualisation.virtualbox.guest.enable = true;
+}

home.nix

@@ -0,0 +1,76 @@
+{ config, pkgs, ... }:
+
+{
+  # Home Manager needs a bit of information about you and the paths it should
+  # manage.
+  home.username = "kyler";
+  home.homeDirectory = "/home/kyler";
+
+  # This value determines the Home Manager release that your configuration is
+  # compatible with. This helps avoid breakage when a new Home Manager release
+  # introduces backwards incompatible changes.
+  #
+  # You should not change this value, even if you update Home Manager. If you do
+  # want to update the value, then make sure to first check the Home Manager
+  # release notes.
+  home.stateVersion = "24.11"; # Please read the comment before changing.
+
+  # The home.packages option allows you to install Nix packages into your
+  # environment.
+  home.packages = [
+    # # Adds the 'hello' command to your environment. It prints a friendly
+    # # "Hello, world!" when run.
+    # pkgs.hello
+
+    # # It is sometimes useful to fine-tune packages, for example, by applying
+    # # overrides. You can do that directly here, just don't forget the
+    # # parentheses. Maybe you want to install Nerd Fonts with a limited number of
+    # # fonts?
+    # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; })
+
+    # # You can also create simple shell scripts directly inside your
+    # # configuration. For example, this adds a command 'my-hello' to your
+    # # environment:
+    # (pkgs.writeShellScriptBin "my-hello" ''
+    #   echo "Hello, ${config.home.username}!"
+    # '')
+  ];
+
+  # Home Manager is pretty good at managing dotfiles. The primary way to manage
+  # plain files is through 'home.file'.
+  home.file = {
+    # # Building this configuration will create a copy of 'dotfiles/screenrc' in
+    # # the Nix store. Activating the configuration will then make '~/.screenrc' a
+    # # symlink to the Nix store copy.
+    # ".screenrc".source = dotfiles/screenrc;
+
+    # # You can also set the file content immediately.
+    # ".gradle/gradle.properties".text = ''
+    #   org.gradle.console=verbose
+    #   org.gradle.daemon.idletimeout=3600000
+    # '';
+  };
+
+  # Home Manager can also manage your environment variables through
+  # 'home.sessionVariables'. These will be explicitly sourced when using a
+  # shell provided by Home Manager. If you don't want to manage your shell
+  # through Home Manager then you have to manually source 'hm-session-vars.sh'
+  # located at either
+  #
+  #  ~/.nix-profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  ~/.local/state/nix/profiles/profile/etc/profile.d/hm-session-vars.sh
+  #
+  # or
+  #
+  #  /etc/profiles/per-user/kyler/etc/profile.d/hm-session-vars.sh
+  #
+  home.sessionVariables = {
+    # EDITOR = "emacs";
+  };
+
+  # Let Home Manager install and manage itself.
+  programs.home-manager.enable = true;
+}